Poultry barrier net

Setting up your bird net is simple: you will build a wire frame around the area, then clip the net to the wire.

1. Place Your Fixings

• Put Main Fixings every 10 meters and at every corner/turn.
• Put Intermediate Fixings in a straight line between the main ones.

2. Run and Tighten the Wire

• Start: Loop the wire through your first main fixing and secure it with 2 grips or ferrules.
• End: At the other end, loop the wire into a barrel strainer, hook the strainer to the main fixing, and twist to tighten the wire.

(For runs over 10 meters, add a criss-cross wire for extra support).

3. Clip on the Net

• Use a cable tie to anchor the corner of the net to a corner fixing.
• Pull the net tight and square, then clip every single mesh loop to the wire using hog rings.

Quick Tips

• Stainless Steel vs Galvanised: We highly recommend Stainless Steel (304 or 316 grade). Galvanised wire is cheaper but will rust much faster.
• Get the Right Fixings: Make sure your screws/plugs match your surface (wood, brick, metal, or cladding).

If you need help with installation, please call us at 01308 425100 or visit our sister site HuckTek.