Safety Netting > Security Netting > Privacy Netting

Air-permeable sheet, PE, 200 g/m² - Made to Order

execution
Sheets per m²
Size
Made to order
finish
normal
weight per m²
200 g/m²
material
polyethylene fabric
Shading
50%
mesh size
2 mm
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm), brass eyelets with orange, terracota and cream sheets, stainless steel eyelets standard
Article number
720
Unit Price per m²
£ 6.50
Shipping
Shipping cost
Color
 meter
 meter
Unit Price
£ 19.50 *
GBP 23.40 * incl. VAT:
£ 23.40 * inc. small size surcharge of: £ 13.00 (200%)

Air-permeable sheet, PE, 200 g/m² - Made to Order

Close mesh sheets are used on building sites to protect workers, buildings and other property from falling debris. They can be used in a range of scenarios including as shade netting, and as debris netting when attached to fall arrest netting when you require a heavier duty solution than standard debris netting. 

This close mesh sheet comes with an added strength banded edge to reduce the chance of rips and tears giving the sheet a much longer life span. In addition to the perimeter banding it also comes with pre-installed eyelets. These make installing and attaching close mesh sheets much easier when being used on scaffolding. 

Thanks to the light weight material this sheet is easy to fold, store and transport from job to job. It is also waterproof, UV resistant and fully air permeable. 

Technical Specs

  • 200 g/m²
  • Polyethylene
  • Air-permeable plastic cover sheet, UV-stabilised,
  • Complete with reinforced edges and eyelets every 0.50 m.
  • Shading: 50:50 

Related Products

Properties
Article number
720
Available colours
Light green (010)
Dark green (015)
White (02)
Orange (03)
Blue (04)
Red (07)
(66)
Terracotta (76)
(86)
Type
air-permeable
Kind
sheet
Melting point
155 °C
Size
Made to order
finish
normal
weight per m²
200 g/m²
material
polyethylene fabric
Shading
50%
mesh size
2 mm
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm), brass eyelets with orange, terracota and cream sheets, stainless steel eyelets standard
Maximum Tensile Strength
60 daN (according to DIN 53 857/1, average lengthways)
Standards and Rules
Oeko-Tex® certificate 12.0.02466
Continuous operating temperature
-30 to +60 °C
Bending strength & abrasion resistance
good
Weather resistance
good
UV-Resistance
250 kly
Tensile strength after two years of climatic influences
90%
Customs tariff number
6307 90 10