1. Safety Netting
  2. Security Netting
  3. Privacy Netting
HUCK
Safety Netting > Security Netting > Privacy Netting

Air-permeable sheet, PP, 550 g/m² - Made to Order

Size
Made to order
execution
without shock cord
finish
normal
weight per m²
550 g/m²
material
high tenacity polypropylene
mesh size
2 x 6 mm
Shading
50%
Edge Execution
with reinforced and stitched edges all around (approx. 40 mm wide)
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Article number
785
Unit Price per m²
£ 8.00
Shipping
Shipping cost
 meter
 meter
Unit Price
£ 24.00 *
* incl. VAT:
£ 28.80 * inc. small size surcharge of: £ 16.00 (200%)

Air-permeable sheet, PP, 550 g/m² - Made to Order

Close mesh sheets are used on building sites to protect workers, buildings and other property from falling debris. They can be used in a range of scenarios including as shade netting, and as debris netting when attached to fall arrest netting when you require a heavier duty solution than standard debris netting. 

This close mesh sheet comes with an added strength banded edge to reduce the chance of rips and tears giving the sheet a much longer life span. In addition to the perimeter banding it also comes with pre-installed eyelets. These make installing and attaching close mesh sheets much easier when being used on scaffolding. 

Thanks to the light weight material this sheet is easy to fold, store and transport from job to job. It is also waterproof, UV resistant and fully air permeable. 

Technical Specs

  • 550g/m², approx
  • High tenacity polypropylene
  • Complete with reinforced edges and eyelets every 500mm
  • UV-stabilised and Air-permeable plastic cover sheet 
  • Shading: 50:50

Related Products

Properties
Article number
785
Available colours
Green (01)
Type
air-permeable
Size
Made to order
execution
without shock cord
finish
normal
weight per m²
550 g/m²
material
high tenacity polypropylene
mesh size
2 x 6 mm
Shading
50%
Edge Execution
with reinforced and stitched edges all around (approx. 40 mm wide)
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Continuous operating temperature
-40 to +80 °C
Melting point
165 °C
Bending strength & abrasion resistance
good
Weather resistance
good
Tensile strength after two years of climatic influences
90%
Customs tariff number
6307 90 10