1. Bird Deterrents
  2. Bird Netting
  3. Sparrow Nets
Bird Deterrents > Bird Netting > Sparrow Nets

20m x 10m Sparrow Net - Stone

£ 257.40 * GBP 257.40 * excl. VAT: £ 214.50

Article number: BN2122
Ships in approx. 1-5 days

Shipping: Orders below £50 have a delivery charge of £4.99 (except for goods marked as bulky). Orders over £50 have a standard minimum shipping charge of £10.79. All orders are sent on a next-day service.

Description Properties Downloads
Article number: BN2122
Available colours: Black (06)
For: Sparrows
colour: stone
material diameter: 12/6
mesh size: 19 mm
size: 20 x 10 m
Ships in approx. 1-5 days

20m x 10m Sparrow Net - Stone

Bird netting can be used in a range of situations including for bird proofing buildings and roofs, in the garden, and for aviaries. It prevents birds from nesting in problem areas, causing damage and health issues occurring from droppings and other hazardous material.  

Our Huck bird netting is suitable for both domestic and commercial applications. It is lightweight for easy transportation and installation and knotted for added strength. All of our netting is chemically inert, rot proof and UV stabilised giving you peace of mind that our netting will last for many years once installed.

Technical Specs

  • Made from 12/6 twine
  • Polyethylene Netting
  • Knotted square Mesh
  • 19mm (3/4") Mesh
  • UV stabilised
  • Chemically inert and rot proof
  • 20m x 10m

Installation Guide

To install anti bird netting, you need some basic tools and straining wire. If installing on buildings the first step is installing a wire perimeter around the area being protected.

Before installing the wire the main bird net fixings (eyebolts) must be installed every 10m and wherever the wire will change direction. Intermediate net fixings (pins, rivets & rackets) should be installed at appropriate intervals for the bird species being proofed against.

Once fixings have been installed start a new run of wire from each main fixing. The wire should be looped through the eye of the main fixing at one end and secured in place using 2 ferrules or 2 wire rope grips. At the other end, the wire should be looped through the eye of a hook/eye barrel strainer. The hook end of the strainer should then be attached to the eye of the main fixing. The wire can then be tensioned accordingly. Tensioned cross-wires may be required for runs over 10m.  

To start fitting the anti bird netting, first use a cable tie to attach the corner of the net to a corner fixing. From there every mesh should be hog ringed to the wire, ensuring the net is tight and square. This ensures that there are no gaps and that birds are prevented from gaining entry through small gaps and holes. 

Related Products