Bird Netting Fixings
25mm Self Drill Screw, Stainless Steel - Pack of 100
5mm x 85mm SS Straight Shank Masonry Drill Bit
40mm Screw Eye Bright Zinc Plated - Pack of 100
8mm x 100mm SDS+ Masonry Drill Bit
Red Nylon Plug for Screw Pin - Pack of 100
75mm Vine Screw Eye, Bright Zinc Plate - Pack of 100
5mm x 150mm SS Straight Shank Masonry Drill Bit
20mm Bridge Clamp - Pack of 10
10mm x 100mm SDS+ Masonry Drill Bit
35mm Stainless Steel Screw Pin
20mm Toothed Girder Clamps, Stainless Steel
25mm Split Pins Stainless Steel - Pack of 100
Brown Plastic Rawlplug Wall Plugs - Pack of 100
8mm x 19mm Posi-Panhead Stainless Steel Screw - Pack of 100
Professional Rachet Crimp Pliers
150mm Multi-Purpose Cable Bracket - Pack of 10
7mm x 100mm SDS+ Masonry Drill Bit
5-9mm Super Clips, Stainless Steel - Pack of 100
25mm Self Drill Screw, Bright Zinc Plated - Pack of 100
12mm x 100mm SDS+ Masonry Drill Bit
7mm Flexible Nut Spinner
19mm-50mm Adjustable Bridge Clamp
11mm x 150mmmm SS Straight Shank Masonry Drill Bit
Yellow Plastic Rawlplug Wall Plugs - Pack of 100
10-16mm Beam Clips, Galvanised - Pack of 100
2mm Aluminium Ferrules - Pack of 100
100mm Vine Screw Eye, Stainless Steel - Pack of 100
Bird Netting Fittings Advice
As well as our extensive range of bird-proofing products including bird netting, bird spikes and solar panel bird proofing we also provide the relevant bird netting installation fixings to install these bird-proofing systems.
In this section, you will find a range of tools and fixtures that can be used with our bird-proofing products.
When installing anti bird netting, we recommend the following advice for bird netting installation fixings. If you have any questions about bird netting installation then please do contact our team who will be happy to help advise on the right products for the job.
Bird netting installation usually requires a strong wire perimeter onto which the bird netting can be attached. The wire should cover the whole area that is being bird proofed as this is what the bird net will be attached to when securing it to the building or roof.
We advise that when fixing a straining wire to install main fixings every 10m and wherever the wire will change direction. Main fixings include zinc eyebolts and bridge clamps.
After securing the main fixings you can move onto installing the intermediate fixings. These bird net fixings should be installed at appropriate intervals for the bird species being proofed against.
Start a new run of wire from each main fixing then loop the wire through the eye of the main fixing at one end and secure in place using 2 ferrules or 2 wire rope grips.
At the other end, the wire should be looped through the eye of a hook/eye barrel strainer. The hook end of the strainer should then be attached to the eye of the main fixing and the wire tensioned accordingly.
Tensioned cross-wires may be required for runs over 10m. To start fitting the net, first, use a cable tie to attach the corner of the net to a corner fixing. From there every mesh should be hog ringed to the wire, ensuring the net is tight and square.